Press ESC to close

How To Fix Apple iPhone 6s No Display And Black Screen Issue

If you are having no display issue or a black screen on your iPhone 6s or any other display issue on your iPhone, below is how to fix it on your own. We will be showing you the workaround troubleshooting on how to fix any iPhone 6s display or Black screen. Before we go further, you should know that the possible cause of no display or a black screen on your iPhone is caused by faulty hardware or damage to some circuit components that are connected to the LCD.

Related:

However, in some cases, this can be from software, maybe cause by a corrupt application or system. Nevertheless, if you are having a Black screen or blank screen on your iPhone and can still hear when a call comes in or your device still vibrates normal with sound notification but you’re unable to tap. Then definitely your device has an issue which most likely causes by hardware. Still, if you notice this development all of a sudden, there’s no fault on the battery, no wet or no fall, then it might likely be from the software. Below is the possible solution to fix a Black screen on iPhone or any display issue.

Fix Apple iPhone 6s No Display

Black Screen on iPhone 6s or No Display? Restart or Reboot Your iPhone

Before you restart or Reboot your iPhone, make sure that the device is fully charged. Also, ensure that the battery is not damaged and it can still power up the phone. You don’t have to wait till it charges to 100% either. Just plug it and wait for a few minutes.

Step 1: Press and hold the Sleep/Wake button until the red slider shows up.
Step 2: Now slide your finger across the slider to turn the iPhone off.
Step 3: Hold Down the Sleep/Wake button again after a few seconds until the Apple logo shows up on the screen.

If the iPhone boot and restart successful, you should look for and forced to quit the app that is causing this issue. To do that…

Step 1: Go to the Home screen.
Step 2: Tap on the Home button twice.
Step 3: Finally, Swipe upwards on the screen

If the restart didn’t resolve the issue, then it’s time to hard reset the iPhone. Follow the method below to reset your iPhone 6s.

Black Screen or No Display on iPhone 6s? Reset Your iPhone

A hard reset from experience use to solve a serious software problem. The hard reset won’t affect your iPhone 6s content or data. To do that, hold down the Sleep/Wake (Power) button and the Home button at the same time for 10 seconds until you see the Apple logo appear. Follow the rest of the onscreen instructions to hard reset your iPhone.

Final solution: Restore your iPhone through iTunes.

Are you still having the no display or Black Screen problem on your iPhone 6s? Let’s try this solution. This solution will require a computer. Mac or Windows with the latest iTunes install will just do. Below are the steps on how to reboot your iPhone 6s through iTunes.

Step 1: Connect your iPhone to the computer using a micro USB cable.
Step 2: While connected, press and hold the Sleep/Wake and Home buttons at the same time.
Step 3: Keep holding those keys until the Recovery Mode screen shows up
Step 4: When prompted with the option to restore or update, select Update.

Now you should be patient and wait for iTunes to reinstall iOS without erasing your data. This could take up to 15 minutes or more for iTunes to download the software for your phone. Once it’s done, your iPhone will exit the recovery mode.

Still, your iPhone 6s is showing Black Screen or no display, your guess is as good as mine. Your iPhone has a hardware issue and the only solution is to take it to a good technician for a proper check-up. You should contact Apple support team and see how it goes.

Don’t try to fix it yourself. We just hope that you were able to fix your iPhone 6s Black Screen or other display issues.

0 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 5 (0 votes, average: 0.00 out of 5)
You need to be a registered member to rate this.
Loading...

James T.

James, a distinguished alumnus of MIT, where he specialized in Computer Science and Communications Technology, has an impressive academic foundation that underpins his expertise. With over a decade in the industry, he deciphers complex technology into easy how-tos. Known for his keen insights, James is dedicated to helping readers navigate the rapidly evolving digital landscape.

Leave a Reply

Your email address will not be published. Required fields are marked *