Are you looking for a way to bypass the FRP account on your Vivo smartphones? If so, then you have come to the right place.
In this blog post, we will discuss how to use an EDL Test Point to remove the FRP account on your Vivo phones. We will provide step-by-step instructions to help you get started with this process.
You can use this method on the Vivo phones below.
- Vivo V27, Vivo 27 Pro, Vivo V27e, Vivo V25, Vivo V25 Pro, Vivo V25e
- Vivo Y56, Vivo Y55s, Vivo Y100, Vivo Y55, Vivo Y35, Vivo Y02, Vivo Y73t, Vivo Y53t, Vivo Y16, Vivo Y22, Vivo Y75, Vivo Y35, Vivo Y77e
- Vivo iQOO Neo 7, Vivo iQOO Z6, Vivo iQOO z6x, Vivo iQOO 9t
- Vivo X80 lite, Vivo X90 Pro, Vivo X90, Vivo x80
- Vivo 16 Pro, Vivo S16, Vivo S16e, Vivo S15, Vivo S15 Pro
So, if you are looking for a way to bypass the FRP account on your Vivo phones, keep reading to learn more!
Unlocking Vivo Phones: How EDL Test Points Can Help
Unlocking a Vivo smartphone can be done in a few steps with the help of EDL Test Points. EDL stands for Emergency Download Mode and it is a special state that your device enters to allow you to access certain features or functions.
For example, if you want to remove the Factory Reset Protection (FRP) account on your Vivo phones, you must first enter EDL mode. This can be accomplished by following these steps:
- Power off your phone.
- Connect your phone to your PC using a USB cable.
- Open Device Manager on your computer.
- Look for your phone listed as Qualcomm HS-USB QDLoader 9008.
- Now open the Remove FRP option.
- You have now successfully unlocked your Vivo V9 and removed the FRP account!
Using EDL test points to unlock your Vivo phone is a simple process that doesn’t require any special technical skills. If you ever find yourself needing to unlock your Vivo phone, just remember to follow the steps outlined above and you’ll be able to do so in no time at all.
Risks Involved In Removing FRP Account
When removing FRP (Factory Reset Protection) from a Vivo V9 device, it is important to understand the risks involved. FRP is an anti-theft protection feature used by Google on all Android devices running Android 5.0 and above.
When an Android device is factory reset, the FRP requires you to enter the previously used Google account before the device can be used.
Removing the FRP account involves bypassing the authentication process which means the device will no longer be protected by Google’s security protocols.
This means that any malicious third party may have access to your device and be able to access its contents. Therefore, it is very important to make sure that you are using a secure and trusted method for removing the FRP.
It is also important to note that there is always a risk of bricking your device when attempting to bypass the FRP account.
This means that the device may become unusable or suffer from permanent damage. Therefore, it is important to make sure you are using a reliable and safe method for removing the FRP account from your Vivo V9 device.
How To Find EDL Test Points On Vivo Phones
The EDL Test Points, or Emergency Download Mode (EDL), is a method used to unlock certain Android phones and tablets that have locked bootloaders.
It is important to note that this mode is primarily intended for professional-level technicians, and unlocking your device in this manner may void your warranty.
Finding the EDL Test Points on the Vivo phone can be a bit tricky since the device does not have any visible buttons or ports to enter the mode.
Fortunately, there are several ways to access this mode, depending on the model of the Vivo phones.
The first option is to use the physical button combination. If your device has a removable back cover, you can locate a small hole labeled “Reset” near the lower edge of the phone’s frame.
To enter the EDL mode, press and hold the Volume Up and Power buttons simultaneously until the device vibrates and enters the mode.
If your device does not have a removable back cover, you will need to use a special cable to access the EDL mode. This cable is typically referred to as a “USB EDL Cable” and can be purchased from most online retailers.
To use this cable, simply connect it to both your computer and your device, and then follow the instructions to enter the EDL mode.
Once you are in EDL mode, you will see a prompt that says “Qualcomm HS-USB QDLoader 9008.” At this point, you should open the EDL Mode and then open the Remove FRP option to begin unlocking your device.
After following these steps, your Vivo V9 should now be unlocked and ready to use without any restrictions.
Steps To Remove FRP Account Using EDL Test Points
- Power off your Vivo V9 phone and remove the battery if it is removable.
- Connect your phone to your PC using a USB cable.
- Now open Device Manager on your PC and locate your device under Ports (COM & LPT).
- Now open EDL Mode and you will see your phone listed as Qualcomm HS-USB QDLoader 9008.
- Right-click on it and select the “Update Driver Software…” option and then “Browse my computer for driver software”.
- Navigate to the folder where you have extracted your firmware and select the prog_emmc_firehose_8917_ddr_vivo_v9 file from the firmware folder.
- Click “Next” to proceed with the installation of the driver.
- Now open the Remove FRP tool and wait for the process to complete.
- Once done, reboot your Vivo V9 phone.
- Done! You have successfully removed the FRP account from your Vivo V9 using EDL Test Points.
Precautions To Consider While Removing FRP Account
Removing FRP (Factory Reset Protection) from your Android phone can be risky if not done properly. It is important to take certain precautions before attempting to remove FRP from your device.
Here are some of the precautions you should consider while removing FRP from your device:
- Make sure that you have backed up all of your important data before attempting to remove FRP. This will help you restore any lost information once the process is complete.
- Be sure to double-check that you have enabled USB Debugging Mode on your device. This is necessary for the FRP removal process to be successful.
- Make sure that you are using the proper tools and software when attempting to remove FRP. Not all software or methods may be compatible with your specific device model.
- Be aware that any changes made to the device’s firmware during the removal process may void the device’s warranty.
- Last but not least, make sure that you follow all instructions carefully when removing FRP from your device.
In conclusion, EDL test points are a useful tool for advanced users to put their Qualcomm-based devices into EDL mode.
This mode allows for advanced functions like firmware flashing and unlocking the bootloader, and can also be used to remove FRP and MI accounts from devices.